Видео

😂

Spectacular, saves my shoulder bursitis. Revelation: It worked with a progresso soup can - new england clam chowder . Thanks man 🙂

i hope you are still out there doing interesting projects...i do practical applications on my places also.

Did you change the jet at the front at all?

Damn, just had Dead flashbacks. hahaha Nice work!

i know the video is 3 yrs old .The butterflies sprinklers work great. You should look at impact sprinklers (rainbird) they cover a larger area around your structures. when mounted high like on the roof or on the gable ends. do a search for structure protection units . I am a firefighter and do structure protection

This should work pretty well. View my comments on using plastic bottles instead of cans. 16 oz bottles will weigh around 2 1/2 lbs. so I assume that 12 oz cans will weigh around 2 lbs. I am concerned about the wire used as it looks like they may not be stiff enough.

Transformer welders dont give a shit about THD. You can plug it into a diesel generator or a inverter. Inverter welders must have a inverter generator. Harmonic disruption rate is real. Needs to be under 5% or you fry your welder cheers.

Take an empty spray can and apply oil or grease to the outside and place it in the shaker. Fill the void with silicone and let it set up. Drill a couple small holes near the bottom of the shaker can to prevent the vacuum effect when trying to remove the spray can. If you have a spray can straw in your junk draw, you could put it in the vent hole to prevent the silicone from closing the vent hole when removing the spray can.

The new designed can openers cut open from the side and not the top leaving NO sharp edges. They are harder to find but work AWESOME.

Does it work when it is folded?

Hi, could you please give me the box size if you still have this?

it's a brilliant and complete evaluation thx 👍

I made one of wood. I used 2/12 and I used lag bolts and I’ve got double layers on each side and it’s been here for years now and been used to where I thought it would fell but it’s still going strong and I can stop a 12 ton jack that stalls the jack even with a cheetah pipe on the handle. I used 1/2 bolts nuts and washers and drilled all my holes. I just used heart redwood.

This is a great idea. Will be doing something similar. Thanks for the video.

Older welders and older generators are way better than new ones..the older generators will give nasty power to inverter welders..so you should run inverter for the new inverter equipment...the old generators are not good for computer circuits..

at first i thought you said "we don't need rules where were goin," roads works too haha. nice work

Save ya some time: It didn't work.

I'm eating Campbells Chicken ala King for lunch tomorrow so I can make this. Solid idea bud.

I have an inverter 250amp welder I can find up to 135amps on a UK 13 amp plug. To power it at 250 amps you need a 32 amp plug. Hope that helps people.

Yeah Myr 5000 would not work I went to a 8750 in it works with my Lincoln 180 mig

I have been running my Lincoln 180 220 volt MIG welder from a 8750 inverter generator from harbor freight. I have had to warranty the f****** thing five times but it worked.

Thanks for this video! I watched the sixtyfiveford one and yours came up in my feed. I made one yesterday with your method but with my own improvements. Oxo can opener (no sharp edges) on several old cans of different sizes provided me with three different sizes of lids. Stacked those and fender washers both sides. Threadlocker on the nut and it worked great! I have a bunch of scrap rubber sheet roofing and cut some to fit inside the can so I could secure spray cans inside for the upside down rotations. I don’t use this for spray paint cans (yet) - I use it for other spray cans that have solids inside like spray lithium grease, garage door spray lubricant, Fluid Film, etc. tested those out yesterday and it definitely improved the product coming out. 🙏🔧👍

I was about to say you will have to glue them in completely. Leaving no access for them to come out

I keep checking to see if you've uploaded anything. It's been a while. Hope things are OK. Gotta say I miss your videos. They were always interesting

You have probably fixed it by now. But if you heated it red hot and put something heavy on the opposite side like your truck. You could probably bend it from the other end. Maybe use a crow bar for leverage.

Hi, do you know if the Greenworks 2100202 can accept those "steel wire brush cutter"? Thanks!

They didn't even fight

Make me one.

Thanks, ive been looking for a video like that!

What's the names of all of the drill bits you used ? And where can I get a 3.5 or a 3.6 open trailer ?

Can I use a clothes hanger?

How’d you get the extra pressure

nice!

Can you tell us if the stains came back? Like the person at the bottom said (@Mattie)? She said that you don't use metal on a toilet. Is that true or what? Please, give your thoughts, OGO.

A great trick. I've seen this a few times on RUclips by various people. I like yours best because the can is a perfect fit, recycles, and it's a cost saver. The only thing you didn't mention is the Swing-A-Way can opener. Man, I love those things! I can't tell you how many cheap, and not-so-cheap pieces of junk can openers that I bought at various stores then threw away because they broke or quit working. My mom had a Swing-A-Way she used for 20 or 30 years and it worked flawlessly every time. They just don't make them any better.

What's he thinking not vice down. The end that needs support bouncing up and down. Leaves burning torch on top of project while hammering?he's and accident waiting to happen!torching on wood that he doesn't want burnt.

That's a really superb generator

You'll ruin the porcelain finish with such a hard brush, will make the stains come back even harder. Don't use metal on a toilet!

Get you a hslf dozen hard drives and remove the magnetscfrom the plates. Two of them will hold a bundle of cash over an inch thick strong enough to hurt your fingers. Alternately you can slip one under the calf hide seat cover your buddy sits on 24/7 when hes not irritating you or making you bleed. Then time it just right and toss one or two stuck together right in the crotch of his shorts when hes sitting down. SNAP! And if you aimed correctly youll hear the most pathetic squeel for a few seconds then breathless whining . Ahh. Good times. Rip Donnie. Ok back to you and the video. Hadnt gotten any notices in some time from you so i thought id check. Use marine shrink wrap over your magnets. I will protect them from bangjng into metal and magnets and breaking or from cutting your fingers as badly when the mags snap together when you werent ready

I grabbed an old rip saw blade idk prolly 9” then got one of those metal “dryer clamps” that loosen/tighten with nut Pop old rip saw blade in rip saw take clamp put it around can then tighten it down to the blade’ Now pull the trigger and let the fun begin’ To make it safer you could cut teeth off old blade I just put some duck tape on them’ This is meant for a drill just giving other idea if u have a rip saw’ it’s like an arm up and down like shaking a rattle can but 100s of times per min compared to my 30 seconds whimsy arm and give up’ hope it helps someone’ They do sell a “streamlined” version of what I described but it’s like $50 google Rip saw paint shaker Cheers’

Seems like a lot of hassle to save 5 bucks.

Where is the extended part sold .

great vid, glad i'm first commenter lmao, i got some cornish hens brining

Thanks for "very useful" gadget, I never thought a spiral stiff wire can mix paint.

I've been in the avian field for nearly 40yrs now. Having "hands on" experience with everything from Warblers to Birds of Prey. And the "Corvid family" of birds consisting of; Ravens, Crows, Rooks, Jackdaws, Magpies, Jays, & Nutcrackers are some of my favorite i've worked with. Their intelligence is off the charts in terms of figuring out puzzles and even learning human speech on par with parrots if not better...!!! Common Ravens have VERY few natural avian predators since they are so large. Averaging 25in with a 4-4.5ft wingspan which puts them in the "Hawk sized" category. And they LOVE antagonizing birds of prey and just for the sheer delight of it...!!! While out in the field i've even seen them going after eagles...!!! Tumbling and soaring just as good as any bird of prey can. It's like watching a dog fight between two fighter jets. Their beaks are massive and quite sharp with a slight hook at the tip unlike their smaller crow cousins. They use this for tearing and ripping into flesh and they are VERY capable predators in their own right. I've seen them killing puffins a small coastal bird and rats, rabbits, etc...So they are FAR more then mere scavengers. I think smaller birds of prey and ravens have a mutual respect for each other. Which is why they aren't predated on as much as other species of birds.

Thank you so much for this.

Yeh, I got the same thing going on with my new $200 amazon purchase. Different brand, but I suppose exactly the same machine as yours.

They do it all the time when they're putting up new steel buildings where no electric has been run to the site yet. Large generators for heavy heavy steel construction.

Thank You for taking the time to create and share this wonderful video! This looks easy! and is exactly what I need!